Other

New 3D-printing system can watch itself print with multiple materials

Using the new 3D inkjet printing system, researchers produced a functional, tendon-driven robotic hand with 19 independently actuatable tendons, soft fingers with sensor pads, and rigid, load-bearing bones. Photo courtesy of Wojciech Matusik, Robert Katzschmann, Thomas Buchner, et al.

Using 3D inkjet printing systems, engineers can fabricate hybrid structures with soft and rigid components, like robotic grippers that are strong enough to grasp heavy objects but soft enough to interact safely with humans.

These multimaterial 3D printing systems utilize thousands of nozzles to deposit tiny droplets of resin, which are smoothed with a scraper or roller and cured with UV light. But the smoothing process can squish or smear resins that cure slowly, limiting the types of materials that can be used.

Now, researchers from Massachusetts Institute of Technology (MIT), the MIT spinout Inkbit and ETH Zurich in Switzerland have developed a new 3D inkjet printing system that can work with a much wider range of materials. Their printer utilizes computer vision to automatically scan the 3D printing surface and adjust the amount of resin each nozzle deposits in real time to ensure no areas have too much or too little material.

Since it does not require mechanical parts to smooth the resin, this contactless system works with materials that cure more slowly than the acrylates that are traditionally used in 3D printing. Some slower-curing material chemistries can offer improved performance over acrylates, such as greater elasticity, durability or longevity.

In addition, the automatic system can make adjustments without stopping or slowing the printing process, making this production-grade printer about 660 times faster than a comparable 3D inkjet printing system.

The researchers used this printer to create complex, robotic devices that combine soft and rigid materials. For example, they made a completely 3D-printed robotic gripper shaped like a human hand and controlled by a set of reinforced, yet flexible, tendons.

“Our key insight here was to develop a machine-vision system and completely active feedback loop,” says Wojciech Matusik, a professor of electrical engineering and computer science at MIT who leads the Computational Design and Fabrication Group within the MIT Computer Science and Artificial Intelligence Laboratory (CSAIL). “This is almost like endowing a printer with a set of eyes and a brain, where the eyes observe what is being printed, and then the brain of the machine directs it as to what should be printed next.”

Matusik is co-corresponding author of a paper on this work in Nature. He is joined on the paper by lead author Thomas Buchner, a doctoral student at ETH Zurich, and co-corresponding author Robert Katzschmann, an assistant professor of robotics who leads the Soft Robotics Laboratory at ETH Zurich, as well as others at ETH Zurich and Inkbit.

This paper builds off a low-cost, multimaterial 3D printer known as MultiFab that the researchers introduced in 2015. By utilizing thousands of nozzles to deposit tiny droplets of resin that are UV-cured, MultiFab can perform high-resolution 3D printing with up to 10 materials at once.

With this new project, the researchers sought a contactless process that would expand the range of materials the 3D printer could use, thereby allowing it to fabricate more complex objects.

They developed a technique, known as vision-controlled jetting, which utilizes four high-frame-rate cameras and two lasers that rapidly and continuously scan the print surface. These cameras capture images as the thousands of nozzles deposit tiny droplets of resin.

The computer vision system converts the images into a high-resolution depth map, a computation that takes less than a second to perform. It then compares the depth map to the CAD (computer-aided design) model of the part being fabricated and adjusts the amount of resin being deposited to keep the object on target with the final structure.

The automated system can make adjustments to any individual nozzle. Since the printer has 16,000 nozzles, the system can control fine details of the object being fabricated.

“Geometrically, it can print almost anything you want made of multiple materials,” says Katzschmann. “There are almost no limitations in terms of what you can send to the printer, and what you get is truly functional and long-lasting.”

The level of control afforded by the system allows it to print very precisely with wax, which can thus be used as a support material to create cavities or intricate networks of channels inside an object. The wax is printed below the structure as the object is fabricated. After it is complete, the object is heated so the wax melts and drains out, leaving a network of open channels.

Because it can automatically and rapidly adjust the amount of material being deposited by each of the nozzles in real time, the system doesn’t need to drag a mechanical part across the print surface to keep it level. This allows the printer to use materials that cure more gradually, which would be smeared by a scraper.

As a demonstration, the researchers used the system to print with thiol-based materials, which are slower-curing than the traditional acrylic materials used in 3D printing. However, thiol-based materials are more elastic and don’t break as easily as acrylates. They also tend to be more stable over a wider range of temperatures and don’t degrade as quickly when exposed to sunlight.

“These are very important properties when you want to fabricate robots or systems that need to interact with a real-world environment,” says Katzschmann.

The researchers used thiol-based materials and wax to fabricate several complex devices that would otherwise be nearly impossible to make with existing 3D printing systems. For one, they produced a functional, tendon-driven robotic hand with 19 independently actuatable tendons, soft fingers with sensor pads, and rigid, load-bearing bones.

“We also produced a six-legged walking robot that can sense objects and grasp them, which was possible due to the system’s ability to create airtight interfaces of soft and rigid materials, as well as complex channels inside the structure,” says Buchner.

The team also showcased the technology through a heart-like pump with integrated ventricles and artificial heart valves, as well as metamaterials that can be programmed to have non-linear material properties.

“This is just the start,” Matusik says. “There is an amazing number of new types of materials you can add to this technology. This allows us to bring in whole new material families that couldn’t be used in 3D printing before.”

The researchers are now looking at using the system to print with hydrogels, which are used in tissue-engineering applications, as well as silicon materials, epoxies and special types of durable polymers. They also want to explore new application areas, such as printing customizable medical devices, semiconductor polishing pads and even more complex robots.

This story is adapted from material from MIT, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.


Source link

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button